INTEX AQUA 3G PRO Q FIRMWARE/FLASHFILE TESTED 100% DONE
You can get the downloading link of INTEX AQUA 3G PRO Q stock firmware below.Firmware contains flash file only of different version.
The process of flashing:
1- First of all download stock firmware on your computer and extract it.
2- When you finish extracting you will find the Sp flash tool,If you don't have one you can download it from and instruction manual.
3-Then open extracted folder you will see driver and install it on your laptop or pc.(Skip if drivers are already installed).
4-After installing driver open the Sp Flash Tool and load that Scatter file from the firmware folder that you have already extracted.
5-Connect the smartphone that you have to the computer using the usb cable.
6-Click on Upgrade / Download button in the Sp Flash Tool to begin the process of flashing.
Did you know about the boot key:
First of all Press Volume + button and insert data cable ,Volume - and insert data cable or even some model you have to insert cable and Insert battery to start the process.
7-Green ring will appear at the end of successful Flash.
Most to be noted:
The above mention process only works with the stock firmware or Custom Rom which comes with the Scatter file in it ( basically mediatek devices ).
Did You Save Your Data :-
You should save important data before the process throw Smart Phone Flash Tool as because during the flashing process your personal data including photos,message,contact will be removed permanently from your phone.
Notice That :-
Some firmware on Mediatek devices makes Imei null but that firmware we provide don't make imei damage,It is tested on many smartphone.
Must required :-
Your Mobile Set should must have at-list 50-60 percent of battery to perform the flashing process.
1.Intex_Aqua_3G_Pro_Q_V10_Indian_SER.zip
2.Intex_Aqua_3G_Pro_Q_V07_Indian_SER_20160628.zip
The process of flashing:
1- First of all download stock firmware on your computer and extract it.
2- When you finish extracting you will find the Sp flash tool,If you don't have one you can download it from and instruction manual.
3-Then open extracted folder you will see driver and install it on your laptop or pc.(Skip if drivers are already installed).
4-After installing driver open the Sp Flash Tool and load that Scatter file from the firmware folder that you have already extracted.
5-Connect the smartphone that you have to the computer using the usb cable.
6-Click on Upgrade / Download button in the Sp Flash Tool to begin the process of flashing.
Did you know about the boot key:
First of all Press Volume + button and insert data cable ,Volume - and insert data cable or even some model you have to insert cable and Insert battery to start the process.
7-Green ring will appear at the end of successful Flash.
Most to be noted:
The above mention process only works with the stock firmware or Custom Rom which comes with the Scatter file in it ( basically mediatek devices ).
Did You Save Your Data :-
You should save important data before the process throw Smart Phone Flash Tool as because during the flashing process your personal data including photos,message,contact will be removed permanently from your phone.
Notice That :-
Some firmware on Mediatek devices makes Imei null but that firmware we provide don't make imei damage,It is tested on many smartphone.
Must required :-
Your Mobile Set should must have at-list 50-60 percent of battery to perform the flashing process.
1.Intex_Aqua_3G_Pro_Q_V10_Indian_SER.zip
2.Intex_Aqua_3G_Pro_Q_V07_Indian_SER_20160628.zip
No comments